断桥铝穿条设备|断桥铝滚压机|断桥铝开齿机_济南合飞数控设备有限公司 断桥铝穿条设备|断桥铝滚压机|断桥铝开齿机_济南德恩机械设备有限公司
行业动态

当前位置:首页 > 新闻动态 > 行业动态

德恩数控:玻璃干燥的四个环节

发布人:admin  发布时间:2016-12-05  浏览次数:2325

1, the drying process of four stages: the stage of heating, drying period and falling rate drying stage, balance drying stage
2. The main physical and chemical changes in the liquid phase were briefly introduced.  
Low temperature stage: the discharge of water to reduce the quality, leaving the porosity increases, the particles closer to the volume shrinkage. In the middle temperature stage, the chemical changes: the oxidation reaction, the decomposition reaction, the crystal form transformation, the production of a small amount of liquid phase. Physical changes: the structure of water and the decomposition of gas, the body mass decreased, density increased, according to the formula of clay, quartz content of the number of different degrees of change in volume. High temperature oxidation stage: 1) insulation stage (2) generation of glass phase (3) what are the formation of mullite, 3 factors influencing sintering?  
Low temperature preheating stage, middle temperature stage, high temperature stage, high temperature thermal insulation stage, cooling stage

1、干燥过程四个阶段:加热阶段、等速干燥阶段、降速干燥阶段、平衡干燥阶段

2、简述液相烧成各阶段所发生的主要物理化学变化。低温阶段:排出水分使质量减轻、留下气孔使气孔率增加、颗粒紧密靠拢使体积收缩。

中温阶段:化学变化:氧化反应、分解反应、晶型转变、少量液相的生成。

物理变化:结构水和分解气体排除,坯体质量减小,密度增加,根据配方中粘土、石英含量的多少发生不同程度的体积变化。

高温阶段:

1)氧化保温阶段

2)生成玻璃相

3)生成莫来石

3、影响烧结的因素有哪些?

低温预热阶段、中温阶段、高温阶段、高温保温阶段、冷却阶段

本文由济南合飞数控设备有限公司(滚压复合机,开齿穿条机,开齿穿条一体机,穿条设备)整理提供

滚压复合机.jpg


推荐产品
  • 开齿穿条一体机
  • 穿条机
  • 滚压复合机
  • 开齿穿条一体机KCJ
  • 滚压复合机GYJ-01
  • 双轴数控四组滚压复合机GYJ-SSK2
  • 数控滚压复合机GYJ-SK5
  • 双轴数控滚压复合机(普通型)GYJ-SK2
  • 开齿机(重型)
  • 全数控滚压复合机
  • 开齿机(重型)
  • 双轴数控滚压复合机GYJ-SK2
  • 铝型材填充发泡机
  • 高配开齿机GKCJ-01
  • 数控开齿机

网站首页|关于我们|新闻动态|产品展示|历届展会|客户留言|联系我们

版权所有:济南德恩机械设备有限公司  备案号:鲁ICP备16044530号  地址:济南槐荫区美里北路工业开发区  电话:0531-88933293

手机:15265318532 / 13355418532 网址:www.hefeisk.com  技术支持:网搜科技  流量统计: